A Jointventure of
idw news
A | A | A

Saarbrücken material scientist wins national competition for best nanotechnology photo

Considered by some to be the "magic bullet" of materials science, carbon nanotubes (CNT) are at the forefront of materials research around the world. Carbon nanotubes are not only extremely stable, they are also excellent conductors of electrical energy and are made from a cheap raw material. Researchers at Saarland University want to use these highly versatile materials to help replace expensive precious metals in electrical contacts by cheaper alternatives such as nickel. By coating these replacement metals with nanotubes they hope to be able to prevent oxidation of the metal surface and thus avoid any associated reduction in electrical conductivity.

By using lasers to help grow nanotubes on a silicon plate, the researchers in Saarbrücken have created structures that, when viewed under a scanning electron microscope, resemble a jellyfish in the ocean. This image was recently awarded first prize in the national photo competition "Making Nano Visible".

The competition was initiated by the three nanotechnology networks NanoBioNet, ASeNT-D and CeNTech. The €1000 prize will be awarded today at the WING.DE nanotechnology conference organized by the Federal Ministry of Education and Research (BMBF) in Berlin. The image taken by the Saarland University doctoral student Nicolas Souza may be used free of charge in connection with articles or other press coverage of Saarland University: <www.uni-saarland.de/pressefotos>

Pencils contain graphite, and graphite consists of carbon atoms aligned in layers. When we use a pencil for writing, these carbon atoms get deposited layer by layer. Nanotubes are essentially two-dimensional arrays of carbon atoms that have been rolled up as you would roll up a sheet of paper. "The result is tubes with a diameter of only ten nanometres, that is some 5000 times thinner than a human hair. These nanotubes are extremely stable and are also excellent conductors of electrical energy," explains Nicolas Souza, doctoral student at the Department of Functional Materials headed by Professor Frank Mücklich. The challenge at present is to grow these nanotubes in a controlled way, such as depositing them as a lawn-like structure with the nanotubes attached to a contact surface. "We take a carbon mixture and by firing a laser at it we can raise the temperature of the target to about 6000 causing it to vaporize at that point. The vaporized carbon atoms deposit on a nickel-coated silicon plate located below and grow to form nanotubes that rise up from the plate. The nickel merely acts as a catalyst and is not consumed in the process. Viewed under a scanning electron microscope, the final product has the appearance of a jellyfish containing a red nickel core," says Souza. His aim now is to try and establish even greater control over the growth process.

The Saarbrücken researchers want to use the carbon nanotubes to replace the precious metals used in electrical contacts by cheaper alternatives such as nickel or copper. Up until now the problem has been that these metals tend to oxidize rapidly. Oxidation causes a deterioration in their surface properties and causes a significant reduction in their electrical conductivity. "If we can get the nanotubes to completely cover the surface of the metal then the nanotubes will act like the bristles of an upturned brush and will be able to penetrate the oxidation layer. This would give us improved electrical contact and the contact would be significantly more stable and more conductive than those produced by conventional means," explains Frank Mücklich, materials scientist at Saarland University and Director of the Steinbeis Material Engineering Center Saarland (MECS). This kind of technique would allow solar collectors to be designed much more efficiently or could enable the production of new products such as ultrathin and flexible computer screens.

In their search for new materials, the researchers in Professor Mücklich's team make use of a variety of laser techniques and 3D visualisation procedures, such as nanotomography. The Department of Functional Materials also recently took delivery of an atomic probe with which materials can be examined at the atomic scale and the results imaged in three dimensions.

Press photographs can be downloaded at: <www.uni-saarland.de/pressefotos>

Questions can be addressed to:

Prof. Dr. Frank Mücklich Universität des Saarlandes / Material Engineering Center Saarland (MECS) Phone. +49 681 302-70501 E-mail: muecke@matsci.uni-sb.de

Nicolas Souza Universität des Saarlandes Phone: +49 681 302- 70539 E-mail: n.souza@mx.uni-saarland.de

Note for radio journalists: Studio-quality telephone interviews can be conducted with researchers at Saarland University using ISDN codec technology. Interview requests should be addressed to the university's Press and Public Relations Office (+49 (0)681 302-3610).

idw :: 04.10.2011

LMU München
LMU Munich is one of the leading universities in Europe with over 500 years of tradition. As a genuine "universitas", LMU has a strong research profile of international renown.

These jobs could be of interest to you