A Jointventure of
idw news
A | A | A

Hannover Messe 2013: Macroscopic and microscopic conducting paths in a one-step-process

Electronic conducting paths determine the functionality of many devices and instruments, such as TFT screens of displays and touch screens or transponders of RFID systems. In these devices, structures with large conducting paths of several millimeters in size alternate with very small structures of several micro- or nanometers in size. So far, these conducting paths have been produced in various production steps. Now, the researchers at the INM Leibniz-Institute for New Materials have succeeded in producing macroscopic and microscopic conducting paths in a single production step.

"For this purpose, we add a photoactive layer, which consists of metal oxide nanoparticles, to a substrate," says Peter William de Oliveira, Head of the Program Division "Optical Materials". "Afterwards, we apply a colorless, UV-resistant silver complex," adds de Oliveira. By exposing this stack of layers to light, the silver complex is decomposed at the photoactive layer, and the silver ions are reduced to silver. This technique has several advantages: It is fast, flexible and non-toxic. With only one step, followed by rinsing with water, the production is completed in only a few minutes. Further process steps for the post-treatment can be omitted. Even a heat treatment is not absolutely necessary. With this technique, the researchers at INM obtain layers with a thickness of up to 100 nanometers and a specific conductivity, which corresponds to a quarter of the specific conductivity of pure silver. A heat treatment of 120C increases the conductivity up to half of silver.

With this basic principle, the researchers at INM are able to apply very individually conductive paths of various sizes onto substrates such as glass or plastic. "There are three different methods we can use depending on the requirement: The "writing" by UV laser is very suitable for the first, custom-made production and the testing of a new design of the conducting path. But this method is too time-consuming for mass production," says the physicist de Oliveira.

Photo masks, which are only permeable to UV light at the requested positions, can be used for the structuring. "However, the production of these masks is expensive and environmentally intense. For a "semi-continuous process", they are particularly appropriate for solid substrates such as glass ", says the materials expert. However, they are not appropriate for roll-to-roll processing, as they are mainly made of quartz glass and are not flexible. The researchers are working intensely on a third method, i.e. the use of so-called transparent stamps: "These stamps replace mechanically the silver complex, and where is not silver, there is no conducting path," says de Oliveira. "With these stamps, we can form structures with the size of a few micrometers. The stamps are made of a soft polymer, thus, we can apply them on a roll. As they are transparent, we are working on implementing the UV source directly into the roll. Hence, the first steps for a roll-to-roll-process would be done," the head of the program division summarizes. With this process, conducting paths of various sizes can be produced on substrates such as polyethylene foils or polycarbonate foils in large scale.

From April 8 to 12, 2013, the researchers of INM present this and other results at the Hannover Messe (Hall 2, Booth C40) in the framework of the Leading Trade Fair "Research and Technology". This includes new developments in the field of display techniques, solar energy, corrosion protection, antifouling, antifriction, functional surfaces and switchable adhesion.

Contact at the booth: Dr. Thomas Müller Program Division "Optical Materials" thomas.mueller@inm-gmbh.de

Dr. Karsten Moh Program Division "Optical Materials" karsten.moh@inm-gmbh.de

Contact at INM:

Dr. Peter William de Oliveira Head of "Optical Materials" Phone: +49681-9300-148 E-Mail: peter.oliveira@inm-gmbh.de

Furthermore, INM presents its activities in different lectures: Tuesday, April 9th, 11:15, tech transfer forum, hall 2 Dr. Mario Quilitz: "Nanotechnology in the Leibniz Association"

Wednesday, April 10th, 11:40, Forum "MicroTechnology - Innovations for Industry", hall 17 Dr. Mario Quilitz: "Das INM - von der Grundlagenforschung bis zur Pilotfertigung"

Thursday, April 11th, 11:00, tech transfer forum, hall 2 Dr. Carsten Becker-Willinger: "Multifunktionale Beschichtungen für industrielle Anwendungen" Dr. Peter William de Oliveira: "Optical Material for Displays and Printed Electronics"

INM, situated in Saarbruecken/Germany, is an internationally leading research centre for innovative materials. Specialized in the three research fields of Chemical Nanotechnology, Interface Materials and Materials in Biology, the institute provides research and development from molecule to pilot production delivered by a highly skilled team of chemists, physicists, biologists, materials and engineering scientists. It cooperates with national and international institutes and develops materials with tailor-made properties for companies throughout the world. INM is an institute of the Scientific Association Gottfried Wilhelm Leibniz and employs around 190 collaborators.

idw :: 25.03.2013

ZIBI Berlin - Graduate School
Many well-renowned universities and research institutes in the areas of immunity and infection biology cooperate in the ZIBI Graduate School Berlin.

These jobs could be of interest to you